Z1OwnersClub GB

Hi. Does anyone have a set of 26mm carbs for a Z900A4? Must be guaranteed to work for at least a week. Many thanks in advance.

I'm going through my collection and refurbishing a few sets as we speak. So I should have a set for sale when I'm finished.

What happened with the ones you sent to ALLENS ?
These carbs are very simple with very little to go wrong apart from blocked passageways and i've never ever had a set that were unusable once properly cleaned.

zed1015 wrote:These carbs are very simple with very little to go wrong apart from blocked passageways and i've never ever had a set that were unusable once properly cleaned.

I would agree, it is rare to have a set that are unusable - but it does happen.

zed1015 wrote:What happened with the ones you sent to ALLENS ?
These carbs are very simple with very little to go wrong apart from blocked passageways and i've never ever had a set that were unusable once properly cleaned.

Cylinders 1 & 2 are still running rich. 3 & 4 appear to be OK. I’m going to borrow a set to confirm 100% that it’s the carbs. I’ve spent over £600 with five different organisations/individuals. I don’t know what else to do that won’t cost more ££££££. I spent a further fortune on tyres, full Dyna, battery, reg/rectifier, switch gear, clutch, tank liner, petcock, air filter etc. etc.

Ultim8pc wrote:I'm going through my collection and refurbishing a few sets as we speak. So I should have a set for sale when I'm finished.

Hi again. Thanks. Let me know the price and what guaranty you can offer. I have no idea what’s wrong with mine but all the jets etc have been replaced with new Mikuni parts. The new Keyster jets have been removed. Perhaps they need to be tuned whilst on my bike? I just don’t know?