Hi,
I’m after a fuel level sensor.
The bike is a GPZ1100B1 but it’s converted to carbs. The tank I’ve got for it was on a Z1100R so has a petrol tap and the fuel sensor is different. It might be the same sensor as a GPZ B2 and maybe even a Z1000J.
It’s the sensor with 6 mounting holes not 5.
I’ll also ideally need the plastic cover for it as well.
The part number for the sensor might be 52005-1026
If anyone has one they would sell please let me know as Kawasaki don’t have them and I can’t find one anywhere
Thanks
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Fuel level sensor
Moderators: paul doran, Taffus, KeithZ1R, chrisu
Re: Fuel level sensor
Looks like the plastic cover is available even if the gauge is not. Normally they just fall off so unlikely to find one if you do get the sender / sensor.
14025 140241434
The gauge unit for the six bolt version appears to be 520051061
https://www.cmsnl.com/kawasaki-z1100r1- ... TYxLZ1KiUk
The 'fits these models' list shows up some years of GT550 so perhaps this one.??
https://www.ebay.co.uk/itm/304103440311 ... SwTgJhFNDS
AL
14025 140241434
The gauge unit for the six bolt version appears to be 520051061
https://www.cmsnl.com/kawasaki-z1100r1- ... TYxLZ1KiUk
The 'fits these models' list shows up some years of GT550 so perhaps this one.??
https://www.ebay.co.uk/itm/304103440311 ... SwTgJhFNDS
AL
1981 J1
Re: Fuel level sensor
I’ve found this from CMS.
https://www.cmsnl.com/products/gauge-fuel_520051026/
Has anyone used CMS before ?
https://www.cmsnl.com/products/gauge-fuel_520051026/
Has anyone used CMS before ?
Re: Fuel level sensor
I have used them a couple of times in the past. Postage has always been expensive, probably more so now. However they are pretty good to get spares off, albeit as a last option.
I bought the oval plastic cover for my B1 last year and got it from Cradley heath Kawasaki.
Rob
I bought the oval plastic cover for my B1 last year and got it from Cradley heath Kawasaki.
Rob
Z1000R/ZRX, RD 125LC, Zx7r , Endurance racer, gpz1100b1
Re: Fuel level sensor
JimBoUK wrote:I’ve found this from CMS.
https://www.cmsnl.com/products/gauge-fuel_520051026/
Has anyone used CMS before ?
Yes, quite a lot. As the man says, the postage isn't cheap (it gets more reasonable the more you buy, if that makes sense) and the stuff can take a while to arrive but they are very reliable and prices tend to be fairly competitive. They often have a bit that you cannot find elsewhere, especially for Yamaha. Recommended.
Olly
'In your twenties you think you are immortal, in your thirties you hope you are immortal, in your forties you just hope it doesn't hurt too much'
Lemmy
Lemmy
Re: Fuel level sensor
Thanks guys.
I’ve ordered one from CMS
I’ve ordered one from CMS
Who is online
Users browsing this forum: No registered users and 121 guests