Page 1 of 1
engine etc required
Posted: Mon Oct 11, 2021 7:24 am
Author: gray
I have acquired a tubular Harris-type frame, and need an engine/ carbs etc. I have tried a friend's GPZ1100 engine in it and it fits. A local frame builder also suggested an early Suzuki Bandit 1200 or early GSXr 750/1100 as suitable.
I would take a complete abandoned project with V5 if it had all the components I want.
Thanks everyone
Re: engine etc required
Posted: Tue Oct 12, 2021 7:47 pm
Author: Andy M
I have a couple of Bandit 12 motors , one needs rebuild , another low mileage from 07 bike (I think). I have a Z1000 J motor , complete other than g.box sprocket cover , mileage unknown turns over,, but If I was doing a Harris I'd be doing a rebuild anyway. PM me if interested . Thanks
Re: engine etc required
Posted: Tue Oct 12, 2021 8:20 pm
Author: gray
could be interesting, if I was nearer I'd do a trial fit with the frame and see what looked best.Plus i still need all the ancillaries
Re: engine etc required
Posted: Tue Oct 12, 2021 8:39 pm
Author: Andy M
The J motor is same mounts as the GPZ ( I believe ) Bandits need a tweak . Butcheredclassics on Facebook will give the info you need . Not a lot on a std Z frame . Not busting to sell either of them . I realised it's a Harris styled frame so budget may be different . Proper Harris would be a different subject .