Hi Zed Heads,
Has anyone got a ratty old set of inlet rubbers going spare?
I'm going to build a jig to hold my bank of MKII carbs whilst off the bike for setting service fuel levels etc.
Kind regards,
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Cylinder Head to Carb inlet rubbers
Moderators: paul doran, Taffus, KeithZ1R, chrisu
Re: Cylinder Head to Carb inlet rubbers
Still looking for a ratty old set of inlet rubbers if someone has any going spare? - doesn't matter if they are cracked etc.
Re: Cylinder Head to Carb inlet rubbers
If you can't get hold of any Rubbers, have you thought of a small but of wood and a hole saw ?
I just grab mine (carefully) in a vice on the beefed up idle adjuster
I just grab mine (carefully) in a vice on the beefed up idle adjuster
CD185, Maggot, Z1-R, Horace, Monster 620ie
Re: Cylinder Head to Carb inlet rubbers
I made a bracket up from an old fridge. Bolt it to the holes in the cable pulley block. then the other end of the bracket is clamped in the vice.That way you're not clamping the carbs at all, Keep it all together with the fuel levels tool.
gray
Re: Cylinder Head to Carb inlet rubbers
I've got a spare set, bit hard mind! you are welcome to the if they are any use.
-
- ZedHead
- Posts: 1180
- Joined: 25th Feb 2008
Re: Cylinder Head to Carb inlet rubbers
Use the ones on ya bike ,
Who is online
Users browsing this forum: JayBee and 87 guests