Page 1 of 1
z1000a1 rear footrest bracket
Posted: Thu Jul 20, 2023 4:05 pm
Author: Peteypops23
Hi folks,
I'm after a rear footrest bracket for an A1/2 if anyone has one hiding in a box in the shed? Condition unimportant as long as it's in one piece
- Screenshot_20230720_164901.jpg (231.83 KiB) Viewed 19734 times
Many thanks,
Pete
Re: z1000a1 rear footrest bracket
Posted: Thu Jul 20, 2023 4:15 pm
Author: warren3200gt
Visually it looks the same as a 650 one. If it is I have several.
Check the part numbers and if the same let me know.
Re: z1000a1 rear footrest bracket
Posted: Thu Jul 20, 2023 5:33 pm
Author: Peteypops23
Will do Warren, thank you.
Re: z1000a1 rear footrest bracket
Posted: Thu Jul 20, 2023 7:19 pm
Author: Peteypops23
warren3200gt wrote:Visually it looks the same as a 650 one. If it is I have several.
Check the part numbers and if the same let me know.
The a1 part number is 34036-001 and the z650 is 34036-002. They do look, as you say, visually similar. I'll measure the existing one and compare, if you don't mind?
Thanks,
Pete
Re: z1000a1 rear footrest bracket
Posted: Thu Jul 20, 2023 7:43 pm
Author: warren3200gt
Re: z1000a1 rear footrest bracket
Posted: Thu Jul 20, 2023 8:26 pm
Author: Peteypops23
So....length is 59mm, width 28mm.
Flat top section where pin fits through is 23mm, leaving 36mm on the slopes.
Distance between bolt hole and locating hole is 15mm centre to centre.
If you don't mind checking a 650 one when you've got time Warren, that would be great. No rush!
Thank you.
Pete
Re: z1000a1 rear footrest bracket
Posted: Thu Jul 20, 2023 8:31 pm
Author: warren3200gt
Do a sketch with dims on and I'll dig one out tomorrow and compare.
I want to see how artistic you are
Re: z1000a1 rear footrest bracket
Posted: Thu Jul 20, 2023 8:47 pm
Author: compo z1r
All same these 2 of a mk2 loads on eBay
Re: z1000a1 rear footrest bracket
Posted: Fri Jul 21, 2023 1:58 pm
Author: warren3200gt
Dimensions as per your post. Ping me your address and I'll get it out to you.
Re: z1000a1 rear footrest bracket
Posted: Fri Jul 21, 2023 2:47 pm
Author: Peteypops23
Champion
Pete
Re: z1000a1 rear footrest bracket
Posted: Fri Jul 21, 2023 3:18 pm
Author: steve-g
The smaller hole on 650 is above the large one, on the 1000 its the other way round.
Re: z1000a1 rear footrest bracket
Posted: Fri Jul 21, 2023 3:28 pm
Author: warren3200gt
steve-g wrote:The smaller hole on 650 is above the large one, on the 1000 its the other way round.
Good spot!
Guess ebay it is then Pete.
Re: z1000a1 rear footrest bracket
Posted: Fri Jul 21, 2023 5:33 pm
Author: Peteypops23
Bu@@er......didn't even notice that meself
Thanks for the trouble guys, much appreciated.
Pete!
Re: z1000a1 rear footrest bracket
Posted: Fri Jul 21, 2023 8:13 pm
Author: compo z1r
steve-g wrote:The smaller hole on 650 is above the large one, on the 1000 its the other way round.
hang about the small hole above the large one is z650 ? as pete's picture ? posted ? but 1000 is below large hole aint that what he wants 1000 a1-2 ? as mine and warren's pic ?
Re: z1000a1 rear footrest bracket
Posted: Fri Jul 21, 2023 9:34 pm
Author: warren3200gt
No Pete wants large closest to edge as per first picture in thread so opposite to ours.
