Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
26mm pumper float bowl.
Moderators: KeithZ1R, chrisu, paul doran, Taffus
-
kev edwards
- Hardcore
- Posts: 2054
- Joined: 3rd Apr 2009
- Location: leverington UK
26mm pumper float bowl.
I am after a 26mm or 28mm pumper number 2 float bowl the one with the pump on it, would prefer one from a 26mm set as I will be cutting g it up. Thanks in advance.
-
warren3200gt
- Hardcore
- Posts: 2763
- Joined: 13th Jun 2014
- Location: Dartford Kent
Re: 26mm pumper float bowl.
What you upto Kev? Got to be pumpers? I could probably scrape together a set of 26 knackered non pumpers if of any use?
PUM 488 June 2023
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
-
kev edwards
- Hardcore
- Posts: 2054
- Joined: 3rd Apr 2009
- Location: leverington UK
Re: 26mm pumper float bowl.
Hi Warren, OK at this end, I trust you are good, needs to be a pumper carb 2 bowl as I'm using it as a clamp for gasket profile, had a couple 3d printed but would prefer the alloy, the picture is more explanatory.
-
warren3200gt
- Hardcore
- Posts: 2763
- Joined: 13th Jun 2014
- Location: Dartford Kent
Re: 26mm pumper float bowl.
Ah, OK, now I understand. Can't help with pumpers soz!
PUM 488 June 2023
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
Who is online
Users browsing this forum: No registered users and 27 guests