The firm who we use for our phone lines has gone bust,we have moved to another firm,hope they are ok,this is probably why some people have had trouble getting through,when calling phone just rings,i have started blasting and powder coating,when i am in the blast room i can not answer the phone as well,for some reason with our new phone system we can not recall the last number that called us,which is a bastard.
As for the exhaust to sump clarance,i spent ages adjusting the downpipe length so the collector is as close to the sump bolt as is practical,the bolt sits between the top two collector stubs,my collector does not have a hammer indent in it either.
Cheers David Yeowart www.exhaustcraft.co.uk
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
harris 4 into1
Moderators: chrisu, paul doran, Taffus, KeithZ1R
-
Exhaust Craft
- 100Club
- Posts: 201
- Joined: 17th Feb 2008
- Location: Whitehaven Cumbria
- Contact:
-
paul doran
- Area Rep.
- Posts: 9141
- Joined: 24th Sep 2004
- Location: near Dublin Ireland
-
Exhaust Craft
- 100Club
- Posts: 201
- Joined: 17th Feb 2008
- Location: Whitehaven Cumbria
- Contact:
Exhaust
I use a Z1000 A1 frame with a 1000 motor in it as a jig,i make every exhaust and make sure they all are a good fit,,I should not have a problem with fit as they are made on a bike not a bench with stops brackets etc etc.
A guy come to see me at my stand at the Stafford show who races a Su***i Gs1000,he was on about N***** Hyde - Harris,aparently they had a firm making them but they did not fit very well and had other problems with them, this is why the Harris systems are not available at the moment.
A guy come to see me at my stand at the Stafford show who races a Su***i Gs1000,he was on about N***** Hyde - Harris,aparently they had a firm making them but they did not fit very well and had other problems with them, this is why the Harris systems are not available at the moment.
Top Bloke 
Brian
I had a Preditor on me old Z1A..... came with it when I bought it 
It was s/s, bit not best quality... looked naff too
The downpipes came down level/parallel, then into a strange collector that exited at the right side (in a triangle shape)
Managed to swap it for a re-chromed standard system (+ had to give him a std ignition system to sweeten the deal)
He just bought a brand new 4:4 
It was s/s, bit not best quality... looked naff too
The downpipes came down level/parallel, then into a strange collector that exited at the right side (in a triangle shape)
Managed to swap it for a re-chromed standard system (+ had to give him a std ignition system to sweeten the deal)
He just bought a brand new 4:4
And on the 7th day... Zeds were created!
-
Exhaust Craft
- 100Club
- Posts: 201
- Joined: 17th Feb 2008
- Location: Whitehaven Cumbria
- Contact:
Jig
Just thought i would post a pic of the jig with an exhaust system in build.
This system is going on a members bike.
This system is going on a members bike.
Who is online
Users browsing this forum: No registered users and 47 guests