Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Z1R Fork tubes

Post all your wanted ads here.

Moderators: chrisu, paul doran, Taffus, KeithZ1R

Post Reply
Message
Author
Roger Hill
100Club
100Club
Posts: 162
Joined: 1st Sep 2008
Location: Nottingham

Z1R Fork tubes

#1 PostAuthor: Roger Hill » Thu May 07, 2009 9:24 pm

Any one out there got a good set of Z1R fork inner tubes with good chrome or can recomend a firm that can rechrome my set in the east midlands if poss.The tubes are different to the Z1000 A1 but the same as the A2 the part number is 44013-1003.
Thanks
Top
User avatar
Mark Stratton
100Club
100Club
Posts: 483
Joined: 16th Feb 2009
Location: Southampton

#2 PostAuthor: Mark Stratton » Thu May 07, 2009 9:46 pm

AM Philpot (Hard Chrome) Ltd - www.pittedforks.co.uk

I've not personally used these guys but I have heard good reports.
Top
User avatar
bedlow1
Custard Cream
Custard Cream
Posts: 850
Joined: 25th Nov 2004
Location: Buckinghamshire

#3 PostAuthor: bedlow1 » Thu May 07, 2009 9:59 pm

or try dave marsden zed power, i got a set of repro ones off him for my Z1R about 3 years ago, after a bit of haggling at the time it worked out cheaper than the phil pot route, and I managed to flog my old pitted ones on ebay! .
Image
Now where did I leave my Keys!
1972 Z1 Euro Spec
1975 Z1B UK Bike
Top
User avatar
mikey
Hardcore
Hardcore
Posts: 2639
Joined: 29th Nov 2005
Location: bristol

#4 PostAuthor: mikey » Thu May 07, 2009 10:27 pm

Yep got my A2 fork legs off Zpower cheaper than re working old ones
Making the world a shiny place with a factory finish
Top
steve f

#5 PostAuthor: steve f » Fri May 08, 2009 5:23 am

i am going to break a complete Z1R sure the forls are ok will have a look tonight
Top
User avatar
ted1r
Area Rep.
Area Rep.
Posts: 2584
Joined: 29th May 2008
Location: Cleethorpes Lincolnshire

bits

#6 PostAuthor: ted1r » Fri May 08, 2009 4:22 pm

Steve Can I have first dibs on the loom?

Ted
"Work this is why I did it"


KE250
KZ1200
Puch Maxi
Be careful with Pensions :e
and me ol Granada
Top
User avatar
PJ
Hardcore
Hardcore
Posts: 2022
Joined: 2nd Dec 2008
Location: Halesowen, West Mids

#7 PostAuthor: PJ » Fri May 08, 2009 7:19 pm

steve f wrote:i am going to break a complete Z1R sure the forls are ok will have a look tonight


Steve, is the front wheel 18" or 19" as the prez is after an 18"
WHO NEEDS DRUGS - WHEN YOU HAVE A ZED!!
Top
User avatar
hillbilly
Hardcore
Hardcore
Posts: 1541
Joined: 31st Jan 2008
Location: lancashire

#8 PostAuthor: hillbilly » Fri May 08, 2009 7:23 pm

what prise engine :wink:
push me shuv you.sez who sez me.
owing p.u.m. (76 z1b)(v reg z1r)
Top
User avatar
Gus
Hardcore
Hardcore
Posts: 1511
Joined: 17th Mar 2007
Location: Gloucestershire

Re: Z1R Fork tubes

#9 PostAuthor: Gus » Sat May 09, 2009 9:05 am

Roger Hill wrote:Any one out there got a good set of Z1R fork inner tubes with good chrome or can recomend a firm that can rechrome my set in the east midlands if poss.The tubes are different to the Z1000 A1 but the same as the A2 the part number is 44013-1003.
Thanks


http://www.discovolantemoto.co.uk/fork- ... at_73.html
"Set the GRINDER on it"
Top
steve f

#10 PostAuthor: steve f » Sat May 09, 2009 12:33 pm

PJ wrote:
steve f wrote:i am going to break a complete Z1R sure the forls are ok will have a look tonight


Steve, is the front wheel 18" or 19" as the prez is after an 18"
its an 18in front wheel got to work out if its better broken or sold complete
will start a new thread
Top
Post Reply

Return to “Wanted Adz”

Who is online

Users browsing this forum: No registered users and 7 guests