Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Oil Capacity on KZ1000

Need help restoring, building, or finding then try here.

Moderators: paul doran, Taffus, KeithZ1R, chrisu

Post Reply
Message
Author
Jim Goose
Regular Poster
Posts: 18
Joined: 15th Jun 2011
Location: Kildare IRL

Oil Capacity on KZ1000

#1 PostAuthor: Jim Goose » Thu Jun 16, 2011 7:25 am

Hi Guys.
I Drained the oil and replaced the Oil filter yersterday.
When I filled the engine with oil, it only took around 1.5 Ltrs before it registered full on the display window.
The filler cap has 3700CC (3.7 Ltrs) stamped on it.
Any one else encounter this, or know if I have enough oil in it?
Cheers
Rob
Top
User avatar
Mark Tiller
Area Rep.
Area Rep.
Posts: 1292
Joined: 12th Jun 2011
Location: Amersham

#2 PostAuthor: Mark Tiller » Thu Jun 16, 2011 8:59 am

did you drain it via the sump plug(Big bolt)or just the oil filter drain screw and change filter?
how much came out?
did u drain it warm?
its deffinitely 3.7l though
Last edited by Mark Tiller on Thu Jun 16, 2011 11:34 am, edited 1 time in total.
07962421462
Top
User avatar
KeithZ1R
Moderator
Posts: 2999
Joined: 15th May 2005
Location: Bury

#3 PostAuthor: KeithZ1R » Thu Jun 16, 2011 11:24 am

Might sound obvious but I would take the clutch cover off and clean the indicator window :) 1 and a half ltrs aint nowhere near enough :shock:
Keith
:bop :gom

You can never have too many tools in your life, except the two legged variety

I'm never wrong, once I thought I was but I was
mistaken.

Phil Churchett winner 2013
Top
garyd
Hardcore
Hardcore
Posts: 2267
Joined: 11th Jun 2011
Location: West of London

#4 PostAuthor: garyd » Thu Jun 16, 2011 1:03 pm

Also it takes time for the oil to seep into the filter. have a look again today to see what it says
Top
Jim Goose
Regular Poster
Posts: 18
Joined: 15th Jun 2011
Location: Kildare IRL

#5 PostAuthor: Jim Goose » Thu Jun 16, 2011 2:11 pm

Thanks for the tips lads.
Defo something a drift.
I'll drain the oil again tonight, use a few methods and see what happens.
:D
Top
PaulMceleney
Chunks
Posts: 568
Joined: 29th Jan 2008
Location: milton keynes

#6 PostAuthor: PaulMceleney » Thu Jun 16, 2011 6:40 pm

Also worth taking the sump off and remove the oil pump and give it a clean its a easy job and well worth doing you will be surprised how much crap is stuck to the oil pump
Top
Jim Goose
Regular Poster
Posts: 18
Joined: 15th Jun 2011
Location: Kildare IRL

#7 PostAuthor: Jim Goose » Fri Jun 17, 2011 8:15 am

paulmceleney wrote:Also worth taking the sump off and remove the oil pump and give it a clean its a easy job and well worth doing you will be surprised how much crap is stuck to the oil pump


Might do that if it,s not too much hassle. Do I need to remove the header pipes? Will I need a new sump gasket?

Drained the oil from the larger of the two bolts, and got the full 3.7 lts out. Happy Days.
Top
User avatar
Mark Tiller
Area Rep.
Area Rep.
Posts: 1292
Joined: 12th Jun 2011
Location: Amersham

#8 PostAuthor: Mark Tiller » Fri Jun 17, 2011 10:23 am

If you do the sump you will need to remove the headers and get a new gasket as you dont want to have to do it twice.

when u drain oil again... u do both large and small bolt, and i would always do filter at the same time
07962421462
Top
HowieD
100Club
100Club
Posts: 365
Joined: 5th Feb 2008
Location: Lincoln

#9 PostAuthor: HowieD » Tue Jun 21, 2011 10:43 am

I've always found that after changing the oil & filter: topping up with 4 litres of oil leaves it at full after running the engine.

The filter keeps hold of the extra 0.3ltr

hope that helps.

regards
H
CD185, Maggot, Z1-R, Horace, Monster 620ie
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: drydockdavies and 120 guests