Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Gearchange return springs
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Gearchange return springs
Guyz,my a4 was fitted with a 3 coil return spring for the gearchange thought the z1 series had the 3 coil job?,tried to fit a 4 coil job but not enough clearance to fit?the 3 coil one seems much weaker.which is the correct on for an a4???or is there an uprated 3 coil more powerfull spring available Ta Paul j
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."
-Han Solo
You can't polish a turd, but you can roll it in glitter
Salad is what real food eats.
Anon
PUM 673
-Han Solo
You can't polish a turd, but you can roll it in glitter
Salad is what real food eats.
Anon
PUM 673
Re: Gearchange return springs
the four coil spring is only used after 095991 engine number
Re: Gearchange return springs
Good spot ,mine is before that number,had got me why it didnt fit,was the four coil just to give extra strength to the shaft return?
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."
-Han Solo
You can't polish a turd, but you can roll it in glitter
Salad is what real food eats.
Anon
PUM 673
-Han Solo
You can't polish a turd, but you can roll it in glitter
Salad is what real food eats.
Anon
PUM 673
Re: Gearchange return springs
yes .if you are using the three coil spring make sure the tails of the spring are not coming into contact with the shaft which holds the selectors which is very close to the spring. if it is just grind 2 mil of the spring
Who is online
Users browsing this forum: No registered users and 38 guests