?I have dismantled all except for the bit inside
Can anyone advise please
Cheers
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Front Master Cylinder Z1a
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Front Master Cylinder Z1a
Want to get this black anodized but not sure how to remove the innards ?
I have dismantled all except for the bit inside
Can anyone advise please
Cheers
?I have dismantled all except for the bit inside
Can anyone advise please
Cheers
Past 5 Years
1974 UK Z1a, Candy Tone Brown/Orange
1976 KZ900a4, Diamond Dark Green
1978 KZ1000a2, Luminous Green
1976 KZ1000a1, Red
1972 GT750J, Candy Lavender
1974 UK Z1a, Candy Tone Brown/Orange
1976 KZ900a4, Diamond Dark Green
1978 KZ1000a2, Luminous Green
1976 KZ1000a1, Red
1972 GT750J, Candy Lavender
Re: Front Master Cylinder Z1a
Is this what you need? viewtopic.php?f=4&t=40707
Re: Front Master Cylinder Z1a
No, it's the insides.
I will have a go at following the Haynes manual later in the week.
Thanks
I will have a go at following the Haynes manual later in the week.
Thanks
Past 5 Years
1974 UK Z1a, Candy Tone Brown/Orange
1976 KZ900a4, Diamond Dark Green
1978 KZ1000a2, Luminous Green
1976 KZ1000a1, Red
1972 GT750J, Candy Lavender
1974 UK Z1a, Candy Tone Brown/Orange
1976 KZ900a4, Diamond Dark Green
1978 KZ1000a2, Luminous Green
1976 KZ1000a1, Red
1972 GT750J, Candy Lavender
Re: Front Master Cylinder Z1a
Have you tried YOU TUBE
Re: Front Master Cylinder Z1a
You will need a set of right angled internal circlip pliers with very thin legs. You will also need a dowel of some sort to help pkoe the piston out from the banjo end if stiff.
Take a pic of the sequence the piston and gubbins come out. Then buy a new piston kit for the master cylinder for the reassembly. Do not attempt to use the old one.
Take a pic of the sequence the piston and gubbins come out. Then buy a new piston kit for the master cylinder for the reassembly. Do not attempt to use the old one.
Motor biking, motor biking, going down the queens highway like a rasher streaky bacon!
Re: Front Master Cylinder Z1a
Past 5 Years
1974 UK Z1a, Candy Tone Brown/Orange
1976 KZ900a4, Diamond Dark Green
1978 KZ1000a2, Luminous Green
1976 KZ1000a1, Red
1972 GT750J, Candy Lavender
1974 UK Z1a, Candy Tone Brown/Orange
1976 KZ900a4, Diamond Dark Green
1978 KZ1000a2, Luminous Green
1976 KZ1000a1, Red
1972 GT750J, Candy Lavender
Who is online
Users browsing this forum: zapo and 45 guests