Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Z1R timing and carb set up required

Need help restoring, building, or finding then try here.

Moderators: chrisu, paul doran, Taffus, KeithZ1R

Message
Author
Scott8210
new poster
Posts: 5
Joined: 21st Apr 2020
Location: Sheffield

Z1R timing and carb set up required

#1 PostAuthor: Scott8210 » Tue Apr 21, 2020 8:35 pm

New to this but I have a near fully restored Z1R that I bought a while back and need someone with the expertise and finesse to set timing and carbs up, its had Boyer Bransden ignition and re wire and also on foam filters with big bore kit, ideally someone not too far from South Yorkshire

User avatar
chrisNI
Site Admin
Posts: 3810
Joined: 22nd Dec 2001
Location: NI

Re: Z1R timing and carb set up required

#2 PostAuthor: chrisNI » Tue Apr 21, 2020 8:44 pm

Hi Scott welcome aboard. :welc Did you buy it rebuilt?

Scott8210
new poster
Posts: 5
Joined: 21st Apr 2020
Location: Sheffield

Re: Z1R timing and carb set up required

#3 PostAuthor: Scott8210 » Tue Apr 21, 2020 9:22 pm

Cheers and yeah I did might get round to looking myself but just wondered if anyone could assist as knowledge is king

User avatar
KWACKERZ1
Hardcore
Hardcore
Posts: 1975
Joined: 1st Sep 2007
Location: Leicestershire

Re: Z1R timing and carb set up required

#4 PostAuthor: KWACKERZ1 » Wed Apr 22, 2020 9:48 am

Welcome Scott pictures would be good?

Scott8210
new poster
Posts: 5
Joined: 21st Apr 2020
Location: Sheffield

Re: Z1R timing and carb set up required

#5 PostAuthor: Scott8210 » Wed Apr 22, 2020 7:02 pm

Yeah I’ll try and sort some

User avatar
chrisNI
Site Admin
Posts: 3810
Joined: 22nd Dec 2001
Location: NI

Re: Z1R timing and carb set up required

#6 PostAuthor: chrisNI » Wed Apr 22, 2020 10:06 pm

Is it running at all or just running a bit rough?

Scott8210
new poster
Posts: 5
Joined: 21st Apr 2020
Location: Sheffield

Re: Z1R timing and carb set up required

#7 PostAuthor: Scott8210 » Thu Apr 23, 2020 5:46 am

Starts but then struggles to idle and abit of backfire

User avatar
KWACKERZ1
Hardcore
Hardcore
Posts: 1975
Joined: 1st Sep 2007
Location: Leicestershire

Re: Z1R timing and carb set up required

#8 PostAuthor: KWACKERZ1 » Thu Apr 23, 2020 8:58 am

If its been standing a while, drain the float bowls , as a start point and maybe new plugs.
Todays fuel is so crap it gums up the pilot circuits in the carbs very easily.

User avatar
KWACKERZ1
Hardcore
Hardcore
Posts: 1975
Joined: 1st Sep 2007
Location: Leicestershire

Re: Z1R timing and carb set up required

#9 PostAuthor: KWACKERZ1 » Thu Apr 23, 2020 9:06 am

If its been standing a while, drain the float bowls , as a start point and maybe new plugs.
Todays fuel is so crap it gums up the pilot circuits in the carbs very easily.

User avatar
Pigford
I'm on prescription!!
Posts: 10566
Joined: 2nd Jan 2006
Location: Hampshire Coast UK

Re: Z1R timing and carb set up required

#10 PostAuthor: Pigford » Thu Apr 23, 2020 12:02 pm

If the fuels been in there longer than a few months, drain it out and put some fresh stuff in to be sure.
And on the 7th day... Zeds were created!

Scott8210
new poster
Posts: 5
Joined: 21st Apr 2020
Location: Sheffield

Re: Z1R timing and carb set up required

#11 PostAuthor: Scott8210 » Thu Apr 23, 2020 6:45 pm

Yeah I always put super unleaded in my bikes anyway and yeah it has fresh fuel in, not checked plugs yet tho but will try and get round to it

User avatar
compo z1r
ZedHead
ZedHead
Posts: 1178
Joined: 25th Sep 2008
Location: SQUIRES NORTH YORKS
Contact:

Re: Z1R timing and carb set up required

#12 PostAuthor: compo z1r » Thu Apr 23, 2020 7:00 pm

Did u do the carbs ? If on pods is the corrector jets fitted have u had them balanced ? Timing is easy ? It’s just a awkward time of now not many will want to ride about yet ?
THE ORIGINAL TARMAC TERRORIST

Z1000S !! Z1R Z810 [ project ] FZR 1000 RU KTM SXF 250 / 08 R6 and my dog zak.???

Z1OC # 886 till 2030

User avatar
Pigford
I'm on prescription!!
Posts: 10566
Joined: 2nd Jan 2006
Location: Hampshire Coast UK

Re: Z1R timing and carb set up required

#13 PostAuthor: Pigford » Fri Apr 24, 2020 6:46 am

Scott8210 wrote:Yeah I always put super unleaded in my bikes anyway and yeah it has fresh fuel in, not checked plugs yet tho but will try and get round to it



Plugs would be my first "port of call" as they are prone to fouling with the ethanol fuels nowadays, a new decent set is well worth it.
And on the 7th day... Zeds were created!


Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 37 guests