Hi all, I’m fitting a reflector to my long rear mudguard. As there wasn’t one fitted before I don’t know the exact position, I was hoping someone could tell me the hole positions relative to the lower edge of the mudguard.
Thanks hopefully
Nick.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Long rear mudguard
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Re: Long rear mudguard
Pic, sounds like your about to convert a z1 mudguard to a z900. Z1 shouldn’t have reflector holes.
Re: Long rear mudguard
It’s a Kz900c ex chips bike, so it had a painted long rear mudguard with no reflector fitted
Re: Long rear mudguard
Any help?....
- Attachments
-
- 21f811e5-c992-430d-99f4-e32189573c00_zpsb7wm7mqu.jpg (107.77 KiB) Viewed 1331 times
ʎɐqǝ uo pɹɐoqʎǝʞ ɐ ʎnq ı ǝɯıʇ ʇsɐן ǝɥʇ sı sıɥʇ
Re: Long rear mudguard
Yes that helps, lovely bike you’ve got there.thanks
Re: Long rear mudguard
Just measured the reflector bracket on my z1000 long mudguard.
From the bottom lip of the mudguard to the centre of the holes measures approximately 96mm. Hope this helps.
Please see images.
From the bottom lip of the mudguard to the centre of the holes measures approximately 96mm. Hope this helps.
Please see images.
Re: Long rear mudguard
Gee...there must be a few Z1 owners out there who can't believe you'd want to drill holes in an early type fender.
The ones without holes are much rarer. You might want to try and do a swap
The ones without holes are much rarer. You might want to try and do a swap
Re: Long rear mudguard
Thanks mjay, that’s exactly what I need.
It’s not an early z1, it’s a ‘76 Kz900c with a wider squared off bottom to match the light shape, so no good for a z1
It’s not an early z1, it’s a ‘76 Kz900c with a wider squared off bottom to match the light shape, so no good for a z1
Who is online
Users browsing this forum: No registered users and 127 guests