Hi Zed heads
I need the open rubber grommet that stops the wiring from getting cut/scraped by the sharp edge of the hole where it goes into the headlamp shell. Seen some on ebay in the states - anyone know of any pattern ones or generic ones that will fit?
Z1000-A1 but the same for lots of Zed models including 650s I believe.
Cheers
Theo
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Headlamp rubber grommet 92071-1008
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Headlamp rubber grommet 92071-1008
2006 Bonneville T100 (lightly customised) and Z1000-A1 (nearly finished!!!)
Re: Headlamp rubber grommet 92071-1008
Do you know the size?...
In the past used these electric box grommets which come in all kinds of sizes and do the same job, not to mention being MUCH cheaper.
https://www.cef.co.uk/catalogue/product ... pack-of-50
In the past used these electric box grommets which come in all kinds of sizes and do the same job, not to mention being MUCH cheaper.
https://www.cef.co.uk/catalogue/product ... pack-of-50
ʎɐqǝ uo pɹɐoqʎǝʞ ɐ ʎnq ı ǝɯıʇ ʇsɐן ǝɥʇ sı sıɥʇ
Re: Headlamp rubber grommet 92071-1008
try yam bits i believe they do one for yamaha
Re: Headlamp rubber grommet 92071-1008
Thanks guys I will measure it and see what I can find. Cheers
2006 Bonneville T100 (lightly customised) and Z1000-A1 (nearly finished!!!)Who is online
Users browsing this forum: No registered users and 49 guests