Hello folks,
I am trying to swop some cam shims through the club service.
I believe Jerry was the contact but I've not had a reply to my DM yet.
Is this service still available?
Thanks Adrian
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Cam Shims
Moderators: paul doran, Taffus, KeithZ1R, chrisu
-
- Regular Poster
- Posts: 70
- Joined: 9th Feb 2016
- Location: Louth
Cam Shims
"Honesty is a very expensive gift. Do not expect it from cheap people ". Warren Buffet on Expectation
- warren3200gt
- Hardcore
- Posts: 2774
- Joined: 13th Jun 2014
- Location: Dartford Kent
Re: Cam Shims
Jerry was last active 11 May so probably hasn't seen your mail yet.
PUM 488 June 2023
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
Re: Cam Shims
Hi.
Purchased some shims from KHI when rebuilding my engine during an inspection / leak fix. Are the shims available through the swop scheme genuine or mixed with pattern items?
Purchased some shims from KHI when rebuilding my engine during an inspection / leak fix. Are the shims available through the swop scheme genuine or mixed with pattern items?
Re: Cam Shims
BAFF1960 wrote:Hi.
Purchased some shims from KHI when rebuilding my engine during an inspection / leak fix. Are the shims available through the swop scheme genuine or mixed with pattern items?
Id have thought they started out as genuine but if it's a swap service we have no real control over what people put back in to replace their swaps so hard to be absolutely definitive. There have been no issues so far in twenty years of running the system
Re: Cam Shims
Hi.
Thanks for that reassuring info.
Thanks for that reassuring info.
Re: Cam Shims
BAFF1960 wrote:Hi.
Thanks for that reassuring info.
What would you suggest as an alternative system?
Re: Cam Shims
Hi.
The shim exchange system is an excellent idea and seems to work well. I normally only source and use genuine parts for reliability and have no experience of pattern ( shims ) engine parts. I was thinking of using the scheme I was a bit unsure parts provenance.
The shim exchange system is an excellent idea and seems to work well. I normally only source and use genuine parts for reliability and have no experience of pattern ( shims ) engine parts. I was thinking of using the scheme I was a bit unsure parts provenance.
Who is online
Users browsing this forum: No registered users and 115 guests