Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Z1000st rear brake pivot excessive float?

Need help restoring, building, or finding then try here.

Moderators: KeithZ1R, chrisu, paul doran, Taffus

Post Reply
Message
Author
Mrg
Regular Poster
Posts: 55
Joined: 26th Oct 2023
Location: Braintree

Z1000st rear brake pivot excessive float?

#1 PostAuthor: Mrg » Fri Jul 26, 2024 1:14 pm

Is it supposed to be like this the Manuel shows no shims or washers to stop this movement.
IMG_20240726_140700.jpg

IMG_20240726_140712.jpg
Top
User avatar
warren3200gt
Hardcore
Hardcore
Posts: 3055
Joined: 13th Jun 2014
Location: Dartford Kent

Re: Z1000st rear brake pivot excessive float?

#2 PostAuthor: warren3200gt » Sat Jul 27, 2024 1:49 pm

Is the splines face at the face of the pivot arm? If the groove in the splines is worn then maybe be the arm is not not pushing on as far as it should?
PUM 488 June 2026
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.
Top
Mrg
Regular Poster
Posts: 55
Joined: 26th Oct 2023
Location: Braintree

Re: Z1000st rear brake pivot excessive float?

#3 PostAuthor: Mrg » Sat Jul 27, 2024 2:37 pm

Good call turns out I could still move the brake pedal on the splines with the bolt done up as far as I dared put the brake pedal in a vice and closed up the pinch gap and now solid on the splines.
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: pjc and 39 guests