Delkevic outlet size ?

[sockpuppet]

Hello

I am ordering a set of Delkevic headers for my Gpz1100B2 , and i already have a silencer i would like to fit to them .
I will be probably needing to source some sort of stepped adapter to fit it.
Does anyone know the outside diameter of the outlet of Delkevic headers ?.

Many thanks
Mick

[BAFF1960]

Hi.
Used these down pipes in my Harris replica system. I think the are 60 mm. I reduced to 50 mm at the collector with a custom cone. I think I had a pressed reducer at one point but discarded it as it didn't look good.

[BAFF1960]

Checked the Delkevic remnant, 60 mm internal, the s/s reducer I have is 49 mm internal. Here's a clearer pic of my fitment solution. Neat and very tucked in. Needs a polish still.

[sockpuppet]

Thanks a lot for all the info , including some great detailed pics.
The link pipe i am going to use is 57mm so the step of a reducer shouldn`t look too bad .

Thanks again
Mick

[sockpuppet]

This is how my pipe idea came out ,
Was very impressed with Delkevic -- came with everything needed to fit it and seems great quality,
Mated it to a V & H can that came on my Tiger 1050 sport with a link pipe and home made sleeve.
Probably not for the purists , but i like it !.
Mick

[r3sc]

I think it looks good! Top job!

[sockpuppet]

Thanks !

[BAFF1960]

Looks like a neat installation. The drop in diameter isn't noticeable. The Delkevic's are good quality, the only down side I've found is the headers dis-colour quickly and are hard to re-polish.