4 into 1 exhaust

[johnA]

Hello gents does anyone know if a 4 into 1 exhaust made for a gpz1100 b1 would fit on the unitrack model many thanks in advance.
John

[Mally]

Here , might need to tweak the search button for your exact model .

https://delkevic.co.uk/s/Kawasaki/GPZ1100/1983

[johnA]

Thanks very much for your help

[johnA]

The part numbers aren't the same so i'm guessing they don't fit each other.

[gray]

it might fit ok at the headers, but only need a different bracket made at the back for the back box

[johnA]

Thanks for that iv'e seen a Kerker copy for sale unfortunately its for the gpz1100b1 so might just need the rear bracket modifying.

[Mark Tiller]

yes but will probably need a rear support bracket made

[neilbarrett]

Centre stand may not fit right up

[floydsz1]

Few years ago I built a gpz1100 b1. Bought a kerker that fitted perfectly then I fitted a zrx1100 swingarm and because of the brace the pipe wouldn't fit, but a simple bit of cutting and re-welding and it was fine, anyone who can weld should be able to make it fit ok.

[johnA]

Many thanks for your replies gents.