I know I asked this question before but cannot remember the replies
What size spacer is needed when you fit a set of mag wheels to a Z1000 that originally had wire wheels fitted
The spacer I am talking about is the one on the brake caliper side
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Mag wheels on a Z1000
Moderators: KeithZ1R, chrisu, paul doran, Taffus
-
paul doran
- Area Rep.
- Posts: 9214
- Joined: 24th Sep 2004
- Location: near Dublin Ireland
Mag wheels on a Z1000
way too many Zeds
-
DeadZedDave
- 100Club
- Posts: 246
- Joined: 1st Nov 2021
- Location: Newcastle
Re: Mag wheels on a Z1000
35.5mm
(always good if you can get somebody else to confirm / agree but this size should be correct I believe)
On the odd occasions in years past I've found the odd c. 0.5mm thick washer fitted in this position just to get the disc centralised in the calliper slot but we're talking 45 year old bikes / mixtures of components !
(always good if you can get somebody else to confirm / agree but this size should be correct I believe)
On the odd occasions in years past I've found the odd c. 0.5mm thick washer fitted in this position just to get the disc centralised in the calliper slot but we're talking 45 year old bikes / mixtures of components !
Who is online
Users browsing this forum: No registered users and 29 guests