Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Wheel code.
Moderators: KeithZ1R, chrisu, paul doran, Taffus
Wheel code.
Hi guys, I have a takasago 2.15×18 5A 303 wheel rim I wanted to ask is the the right rim for a z900a4, also will the spokes zpower sell be suitable for this rim ,thanks again.
- Z1streetfighter71
- Custard Cream
- Posts: 945
- Joined: 16th Oct 2020
- Location: Galway-Eire
Re: Wheel code.
303 is a Z1 rim 5A would be a 75/January. 306 rim is a z900 A4 with a 6 in front of a letter.
Angus.
Too many bikes to list.
Too many bikes to list.
Re: Wheel code.
Thanks for that, I take it some z900a4 will have 1975 rims presumably to use up stock.
- Z1streetfighter71
- Custard Cream
- Posts: 945
- Joined: 16th Oct 2020
- Location: Galway-Eire
Re: Wheel code.
Its possible but there may be others that can confirm. There were 305 and 306 rims being produced in 75 for early the Z900, below is a front rim for what i expect is a very early bike.
Angus.
Too many bikes to list.
Too many bikes to list.
Re: Wheel code.
That's the date code on my front 5k 305. I'm about to have the rims re-chromed, which is not cheap and wanted to make sure they are original fitment for that boke.
Re: Wheel code.
Sorry got that wrong it's 5H 305.
- Z1streetfighter71
- Custard Cream
- Posts: 945
- Joined: 16th Oct 2020
- Location: Galway-Eire
Re: Wheel code.
305 is a 19" front for z900 and z1000 and 306 is a 18" rear for the same bikes, so an early Z900 "rear" would be lets say 5H 306
Angus.
Too many bikes to list.
Too many bikes to list.
Re: Wheel code.
Great , by my reckoning the bike came originally with these rims
Who is online
Users browsing this forum: No registered users and 38 guests