Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Z900 Alternative Carbs

Need help restoring, building, or finding then try here.

Moderators: paul doran, Taffus, KeithZ1R, chrisu

Post Reply
Message
Author
Gordon Wilkinson

Z900 Alternative Carbs

#1 PostAuthor: Gordon Wilkinson » Sun Jun 14, 2009 10:47 pm

Hi all,

Was just wondering if anyone has any experience or suggestions as to which carbs might fit and work on an otherwise standard Z900 engine. There's not going to be an airbox fitted to the bike, just individual K&N filters.

I realise it's going to be "suck it and see" as far as jetting is concerned.

If anyone's done this sort of work, I'd be really grateful for any advice.

Cheers guys.

Gordon.
Top
User avatar
PAULJAC47
Hardcore
Hardcore
Posts: 3257
Joined: 31st Aug 2008
Location: WOLVO WEST MIDS ENGLAND

#2 PostAuthor: PAULJAC47 » Mon Jun 15, 2009 4:34 pm

The Suzuki Gs range work ok but are you looking for more modern carbs? if its just a set to try out send paulstrees a Pm i know he has a couple of sets spare Cheers Paul J...
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."
-Han Solo

You can't polish a turd, but you can roll it in glitter

Salad is what real food eats.
Anon

PUM 673
Top
Gordon Wilkinson

#3 PostAuthor: Gordon Wilkinson » Mon Jun 15, 2009 6:33 pm

Thanks for that Paul, I kind of suspected the GS ones would fit & do the job.

I also wondered whether CV's off a GT750 or suchlike might also work? Have to be an earlier model tho', don't want to have to faf around with carb heating etc!

Cheers,

Gordon.
Top
User avatar
chrisNI
Site Admin
Posts: 3710
Joined: 22nd Dec 2001
Location: NI

#4 PostAuthor: chrisNI » Tue Jun 16, 2009 7:15 am

Z1-R carbs if you can get them are okay - pretty much identical but they're 28s so a bit better. Cvs off a J or 1000R work well Fer has a set on one of his earlier type Z1000s
Top
PaulMceleney
Chunks
Posts: 568
Joined: 29th Jan 2008
Location: milton keynes

#5 PostAuthor: PaulMceleney » Tue Jun 16, 2009 9:38 am

29mm smoothbores if you can get them, there was a set on ebay last year looking at about 250.pounds thats what i would like to have on my bike , using z1r carbs at the moment
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 24 guests