Just wondering if anyone could tell me the thread size of the screws that hold the float bowls on on A4 carbs as a few have stripped and I' m going to try helicoiling them ..
Thanks Crispy.......
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Thread Size
Moderators: paul doran, Taffus, KeithZ1R, chrisu
-
Geoff Meager
- Custard Cream
- Posts: 732
- Joined: 5th Apr 2007
- Location: Dereham. Norfolk.
-
Steve Cooke
- ZedHead
- Posts: 1166
- Joined: 18th Mar 2007
- Location: Southampton
Geoff, it,s an easy job but one thing to be careful with is when drilling out not to let the drill run through as it can mark the body as the hole is so close, also on the ones I,ve done I put a little thread lock on the outside thread as it is such a short Helicoil, just as an insurance. If you don't have an M4 Helicoil set give me a shout when you're ready and I'll lend you mine.
Who is online
Users browsing this forum: No registered users and 207 guests