I've come across a full set of genuine nos throttle valves with the P/N- 16025.1009 (listed for Z1R in Kawasaki parts list) and another set of two with P/N- 16025.085 (Z1000 A1, Z1000A2, etc).
The throttle valves for my A4 are P/N- 16025-075.
All of these throttle valves have the same cutaway of 1.5 and look to be the same, I know there were various differences in the carbs, but as far as I know the only change in the throttle valves was the cutaway.
I was hoping someone here could say for definite if these throttle valves would be directly interchangable with the existing ones in the vm26sc's on my A4 , if so then I will nab a set.
Thanks in advance for any info.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
NOS Throttle valves
Moderators: paul doran, Taffus, KeithZ1R, chrisu
Who is online
Users browsing this forum: No registered users and 129 guests