Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Speedo Drive Bushing Question

Need help restoring, building, or finding then try here.

Moderators: paul doran, Taffus, KeithZ1R, chrisu

Post Reply
Message
Author
ZedHead
Hardcore
Hardcore
Posts: 2727
Joined: 9th May 2009
Location: Darlington
Contact:
Contact ZedHead

Speedo Drive Bushing Question

#1 PostAuthor: ZedHead » Sun Nov 22, 2009 10:47 am

Hi, the thread on my speedo drive cable bushing is slightly damaged. A replacement bushing is available relatively cheaply, but it is held in to the housing with a spring pin that is inserted one way, there isn't a hole on the other side to drift it out.

Has anyone had any experience and therefore got any tips on how to extract this pin?
Top
breakdown

#2 PostAuthor: breakdown » Mon Nov 23, 2009 10:55 pm

Hi Zedhead, You've probably guessed by now, but I'm afraid if there is no way to drift it out, it's going to have to be drilled (very carefully). It's a very short spring pin so not to far to drill. Best of luck.
Top
ZedHead
Hardcore
Hardcore
Posts: 2727
Joined: 9th May 2009
Location: Darlington
Contact:
Contact ZedHead

#3 PostAuthor: ZedHead » Tue Nov 24, 2009 6:55 pm

breakdown wrote:it's going to have to be drilled (very carefully). It's a very short spring pin so not to far to drill. Best of luck.


Drat and double drat, Mutley.

Oh well thanks anyway, I think i'll build up to that one :shock:
Top
Post Reply

Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 84 guests