Page 1 of 1
gasping for air
Posted: Thu Aug 04, 2011 4:05 pm
Author: paul doran
I am currently working on a Z1 at present
I have tuned the carbs balance etc
colourtune is good on all cyclinders
but unless I remove the air filter when I rev it it is gasping for Air
ideas please
Posted: Thu Aug 04, 2011 4:48 pm
Author: zman
Had similar problem.Was a combination first removed my K&N filter and put in new standard one.Also i found at prolong full speed there was a fuel feed problem.
Posted: Thu Aug 04, 2011 5:17 pm
Author: Rich
needle jets knackered,
airways / air jets blocked
air filter knackered
Poor ignition
Posted: Thu Aug 04, 2011 7:52 pm
Author: DogsbolloxofZ1B
You could look into changing the pilot jets on the intake..
http://www.motocarb.com/carbs%20and%20parts.htm
Mike
Posted: Fri Aug 05, 2011 4:01 pm
Author: Blackfox
I had this to happen on my bike when i picked up a set of carbs off a friend the mixture screws where over tightened and it messed up the seats of them and one of the tips was broke off in the carb body