oil cooler bracket fixing
Posted: Wed May 30, 2007 9:14 pm
Any photos of the best way to attach an oil cooler bracket to a z1000 .I have seen them screwed from the side and front. 
Z1OwnersClub GB
Kawasaki's Air Coooled Big Fours
http://z1ownersclub.co.uk/phpBB3/
oil cooler bracket fixing
Page 1 of 1
Posted: Thu May 31, 2007 6:39 pm
Steve, Emailed you some photos mate!
Posted: Thu May 31, 2007 10:11 pm
Thanks if you have'nt put a patent on that ,I shall attempt to copy that bracket.if it does'nt work can always take it off(only joking).Hope your using them spanners. Thanks again
Posted: Fri Jun 01, 2007 6:36 pm
Steve, go for it mate 
I just happened to have a bit of 25x25x3mm ally angle lying about, so thats what I used
Needs a good polish tho' The coolers from BSR,13 row, just right in hot weather, but to efficient in winter 
I just happened to have a bit of 25x25x3mm ally angle lying about, so thats what I used
Needs a good polish tho'
The coolers from BSR,13 row, just right in hot weather, but to efficient in winter