Hi I am after someone who could fit my dymags and Ape calipers to my bike. So they need to be experienced in machining etc. Anyone got any suggestions?
Cheers Rob
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Dymag fitment-fabricator wanted
Moderators: paul doran, Taffus, KeithZ1R, chrisu
Dymag fitment-fabricator wanted
Z1000R/ZRX, RD 125LC, Zx7r , Endurance racer, gpz1100b1
-
- ZedHead
- Posts: 1180
- Joined: 25th Feb 2008
Rob, if you don't mind travelling you could try Lamb Engineering. I think they are in Wimborne, Dorset. They may be able to help you, or put you in contact with someone nearer to your neck of the woods.
They have built some stunning custom bikes so should be able to do pretty much anything I would guess. Just Google them for their contact details. Someone else that might be able to help & I am sure they are over your way are Krazy Horse Custom Cycles. Their telephone number is 01284-749645.
They have built some stunning custom bikes so should be able to do pretty much anything I would guess. Just Google them for their contact details. Someone else that might be able to help & I am sure they are over your way are Krazy Horse Custom Cycles. Their telephone number is 01284-749645.
- Mark Stratton
- 100Club
- Posts: 483
- Joined: 16th Feb 2009
- Location: Southampton
Lamb Engineering are in Salisbury, well just outside.
Here's the link to their website
http://www.lamb-engineering.com/
Here's the link to their website
http://www.lamb-engineering.com/
Who is online
Users browsing this forum: Bing [Bot], zed1015 and 153 guests