Page 1 of 1
Boring question.
Posted: Sat May 25, 2013 9:10 pm
Author: harrythemagnum
How far can you bore 900 barrels?
I have some 1100 pistons or a Z1000A1, will 900 barrels stand it?
Posted: Sat May 25, 2013 9:14 pm
Author: Ginger Bear
I think the biggest you can go with 900 barrels is 1015cc.
Posted: Sat May 25, 2013 9:41 pm
Author: zed1015
Ginger Bear wrote:I think the biggest you can go with 900 barrels is 1015cc.
+1.
They can be squeezed out to 1045 but it leaves the liners a little on the thin side.
Posted: Sat May 25, 2013 11:22 pm
Author: Keefleaf
You need Z1000 barrels to get to 1100/73mm.
....I've prob, got some.
Posted: Sun May 26, 2013 3:09 am
Author: harrythemagnum
Keefleaf wrote:You need Z1000 barrels to get to 1100/73mm.
....I've prob, got some.
Cool.
Thanks for the help guys.
Posted: Sun May 26, 2013 5:25 pm
Author: Rich
Z1000 barrels at 73mm are a bit thin and may lead to distortion of the liner.