martek ignition coils
Posted: Mon Sep 23, 2013 5:57 pm
Author: j.b
i've got a pair of these martek coils and was thinking of using them on my kz750 turbo project bike but carnt find much info on the web about them.
does anyone know the way to wire up the three connectors and/or the best way of testing them
cheers
Posted: Mon Sep 23, 2013 7:40 pm
Author: z1bman
i found this dont know if its any use to you
Hello,I just got a set of martek coils off ebay,with the
instruction sheet.For road racing and normal street use,{non CDI
ignitions}use only terminals 1&3.Connect the 12 volt wire to
terminal 1,connect terminal 3 to points,or electronic ignition.Cover
unused terminal 2 with anything to keep it from shorting to
anything.Possibly a wire nut.Thats wiring option 1.There are three
more options.If you would like to know what they are,email me.One
more thing,they advise bolting or clamping the iron posts sticking
out of the ends,to the frame for heat transfer in cooling the
coils.Mine haven't been drilled out yet,that is my next step.These
are going onto my 86 kz1000p,with weak spark.
Posted: Mon Sep 23, 2013 8:10 pm
Author: j.b
very useful cheers, more than i could find
Posted: Mon Sep 23, 2013 8:17 pm
Author: Z1parR
He's a clever bugger alright is z1bman , he never fails to come up with the goods
I wish he lived closer to me .
For my zed problems i mean , obviously .