Page 1 of 1
does it fit
Posted: Mon Dec 23, 2013 11:23 am
Author: stevo1100
I have a spare gpz 1100 none injection head.does it fit a z1000 engine.
Posted: Mon Dec 23, 2013 11:36 am
Author: zed1015
It bolts straight on but you need an APE top idler tower or similar for the camchain and you will also lose 2 points of compression so will need to compensate for that.
head
Posted: Mon Dec 23, 2013 12:00 pm
Author: stevo1100
thanks for the reply.a friend bought a z1000 minus the head so I will pass it on
Posted: Mon Dec 23, 2013 1:19 pm
Author: zed1015
If it's the unitrack head the valve angles are steeper too so need to watch the piston/valve clearances too.