Z1OwnersClub GB

Hi all,
Well my Z1 is back together. I've got an oil 'weepage' from the cam cover. But I can't find the torque setting for the cam cover bolts in the Clymer manual. I'd like to tighten them down a bit more,but don't want to over stress or strip anything.
Does anybody know the torque settings?
Many thanks for any help
Cheers Paul Mc

Paul,
Where is the leak coming from the gasket or the half moon rubbers?
Who's make of gasket is it?
Regards
Steve

Paul be alert... I have seen hair-line cracks around the corner bolts.
Very hard to spot.
As Wilsons' said those half moons can be a problem, the tops need to be flat, otherwise they tend to push out or in, when tightened.

RegardZ.