Rs 36's
Posted: Tue Jun 17, 2014 1:54 pm
Can anyone advise me what size jets i should use on the rs36's on 1015 z1000 standard barrels, not sure whats in at the moment.
Cheers Ian.
Cheers Ian.
Page 1 of 1
Posted: Tue Jun 17, 2014 3:34 pm
I'm running 130 mains & 20 pilots - 1075cc Wiseco - gas flowed + std cams
Posted: Tue Jun 17, 2014 7:41 pm
Thanks mr pigford i have ordered some 130 mains and 17.5 pilots, did they take much setting up
Posted: Tue Jun 17, 2014 8:35 pm
A bit of messing about, but they're pretty good carbs
Fuel/air screw about 1 1/2 out & needle in middle... float height 17mm (or as Mikuni recommend - can't remember 100%).
Fuel/air screw about 1 1/2 out & needle in middle... float height 17mm (or as Mikuni recommend - can't remember 100%).