warren3200gt wrote:Screw the idle in until it will lock the balance them all again.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
1977 Z1000 A1 Carbs - Carb info
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Re: 1977 Z1000 A1 Carbs - Carb info
Now you have said it out loud it makes sense . . . I think when you have 3 in balance and one rogue one you tend to focus on that one and try and bring in in line with the other 3. The approach you outline is to get the dodgy one locked out and bring the other 3 in line. I'll let you know how I get on, thanks for stating what might be the obvious to most.
Guy
Re: 1977 Z1000 A1 Carbs - Carb info
GuyHughes wrote:Does anyone know what the vacuum gauge settings are for a Z1000 A1 1977 with vm26ss carbs are as a standard build, i.e. Standard pipes, needle jets, air filters, etc.
Off top of my head 28mm MG +/- 2mm.
http://www.airevalleyclassics.co.uk
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
10% discount code Z1OCTEN
Keyster rebuild kits & carburettor spares - airscrews, jets, needles, starter plungers & gaskets.
Also petrol/ethanol proof float bowl gaskets. IMD pistons preferred seller.
Who is online
Users browsing this forum: No registered users and 73 guests