Z1OwnersClub GB

What psi are my forks supposed to be filled at. The table on the pdf manual has a part missing. Any help would be appreciated thanks

I'd get this double checked but I think 10psi is the max. I was putting in my gt.
the seals can blow from about 15psi
Blow them up with a pushbike pump or similar NOT COMPRESSOR, (they fill very quickly )
Cheerz freddy

freddyz1r wrote:I'd get this double checked but I think 10psi is the max. I was putting in my gt.
the seals can blow from about 15psi
Blow them up with a pushbike pump or similar NOT COMPRESSOR, (they fill very quickly )
Cheerz freddy

Cheers for that Freddy. I can see that bit on the manual but it said another number on the pdf that was cut off. I will put 10 in and see what happens.I will use a bike pump too