Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Z1-R Clock Mounting Dampers**Solution Now Found + pics**
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Z1-R Clock Mounting Dampers**Solution Now Found + pics**
Hi People
Stripped my clock bracket today and the foams were knackered - bit like stale sponge cake but harder to scrape off
I have some foam I am planning to trim to shape - but does anyone know where I can get either of the foams from as a spare part
Listed as item 6 & 9 on this diagram -
part code is 92075-1050 large and 92075-1051 small
Also does anyone have any successful ways of doing this with a Z1-R bracket?
Not sure whether best results will be to stick a strip around top of clock then insert into bracket, or stick a strip round top inner face of bracket and drop the clock into it.
Anyone got any experience or pics of a home made set?
There is one on eBay at the moment - http://www.ebay.co.uk/itm/like/12153218 ... 0&ff14=108
Thanks for looking. From Mark
Stripped my clock bracket today and the foams were knackered - bit like stale sponge cake but harder to scrape off
I have some foam I am planning to trim to shape - but does anyone know where I can get either of the foams from as a spare part
Listed as item 6 & 9 on this diagram -
part code is 92075-1050 large and 92075-1051 small
Also does anyone have any successful ways of doing this with a Z1-R bracket?
Not sure whether best results will be to stick a strip around top of clock then insert into bracket, or stick a strip round top inner face of bracket and drop the clock into it.
Anyone got any experience or pics of a home made set?
There is one on eBay at the moment - http://www.ebay.co.uk/itm/like/12153218 ... 0&ff14=108
Thanks for looking. From Mark
Last edited by pertonpc on Sun Feb 22, 2015 8:15 pm, edited 1 time in total.
Z1-R D1, Z650 B2, Z1-B & ZRX 1200 A1P Catch 'em if you can at www.Zedrider.co.uk
adrianhorsfield@live.co.uk
Sunny Bournemouth. Dorset. UK.
Sunny Bournemouth. Dorset. UK.
You could try Neoprene rubber strips selff adhesive - but would nt know what thickness or width you would need ?
http://www.ebay.co.uk/sch/m.html?_odkw= ... e&_sacat=0
http://www.ebay.co.uk/sch/m.html?_odkw= ... e&_sacat=0
adrianhorsfield@live.co.uk
Sunny Bournemouth. Dorset. UK.
Sunny Bournemouth. Dorset. UK.
Thanks Guys
I will send Compo a message Keith cheers.
p.s. got my forks serviced now - thanks for the oil info
Just waiting for the new paint on the bracket to harden off before I have an attempt at making a foam -
I will send Compo a message Keith cheers.
p.s. got my forks serviced now - thanks for the oil info
Just waiting for the new paint on the bracket to harden off before I have an attempt at making a foam -
Last edited by pertonpc on Sun Feb 22, 2015 7:54 pm, edited 2 times in total.
Z1-R D1, Z650 B2, Z1-B & ZRX 1200 A1P Catch 'em if you can at www.Zedrider.co.uk
Give Jimbo an Email at Redline, his stock is constantly changing and some times doesn't list the parts he has.
Do you need this bit? Scrowl down.
http://www.redlinecycle.com/Z1-R%20Dash%20Panel.html
Do you need this bit? Scrowl down.
http://www.redlinecycle.com/Z1-R%20Dash%20Panel.html
Cheers Neil
One set of those will do perfectly thanks.
You have a pm and some PayPal funds.
Thanks for your trouble.
From Mark
One set of those will do perfectly thanks.
You have a pm and some PayPal funds.
Thanks for your trouble.
From Mark
Z1-R D1, Z650 B2, Z1-B & ZRX 1200 A1P Catch 'em if you can at www.Zedrider.co.uk
pertonpc wrote:Cheers Neil
One set of those will do perfectly thanks.
You have a pm and some PayPal funds.
Thanks for your trouble.
From Mark
NOW COMPLETE mark posting Friday morn
THE ORIGINAL TARMAC TERRORIST
Z1000S !! Z1R Z810 [ project ] FZR 1000 RU KTM SXF 250 / 08 R6 and my dog zak.???
Z1OC # 886 till 2026
Z1000S !! Z1R Z810 [ project ] FZR 1000 RU KTM SXF 250 / 08 R6 and my dog zak.???
Z1OC # 886 till 2026
Cheers Neil,
Will put some pics up when I get them.
Have checked the meter harness today - all wiring seems fine.
Likewise for the ammeter and fuel gauge fuse unit.
So I can get the clocks rebuilt when your dampers arrive.
Will put some pics up when I get them.
Have checked the meter harness today - all wiring seems fine.
Likewise for the ammeter and fuel gauge fuse unit.
So I can get the clocks rebuilt when your dampers arrive.
Z1-R D1, Z650 B2, Z1-B & ZRX 1200 A1P Catch 'em if you can at www.Zedrider.co.uk
The new Z1-R silicon meter dampers have arrived now. Many thanks to Compo Z1-R who has made them for me.
They are a perfect fit for the standard bracket and even have a slot for the rolled edge of the bracket to go into. No sticky tape or glue needed :
All these other dampers have to be fitted onto the bracket as well -
Here's what the rebuilt meter bracket looks like now.
I have done a test fitting back onto the bike to make sure I can find and refit all the right fasteners and components. It seems to make more sense now than when it was dismantled - because I have found out what all the pieces do and how they link together.
They are a perfect fit for the standard bracket and even have a slot for the rolled edge of the bracket to go into. No sticky tape or glue needed :
All these other dampers have to be fitted onto the bracket as well -
Here's what the rebuilt meter bracket looks like now.
I have done a test fitting back onto the bike to make sure I can find and refit all the right fasteners and components. It seems to make more sense now than when it was dismantled - because I have found out what all the pieces do and how they link together.
Z1-R D1, Z650 B2, Z1-B & ZRX 1200 A1P Catch 'em if you can at www.Zedrider.co.uk
Who is online
Users browsing this forum: No registered users and 125 guests