Page 1 of 1
Tacho drive seals
Posted: Fri Jun 05, 2015 9:30 pm
Author: phil1r
Hi Guy's, can you change the inner seal in this unit
outer O ring no problem but pissing oil from the centre seal. Is this available as a kit or whole assembly, anyone got info on this and where from.
Posted: Fri Jun 05, 2015 9:51 pm
Author: z1bman
genuine seal still available cradley have it in stock £5.40
Posted: Fri Jun 05, 2015 9:59 pm
Author: pertonpc
Hi Phil,
Take a look on these pics. You can see the inner and outer seal and the part number you need.
Think it is picture 16 as you scroll down
From Mark
http://www.zedrider.co.uk/z1-b.html
Posted: Fri Jun 05, 2015 10:09 pm
Author: phil1r
z1bman wrote:genuine seal still available cradley have it in stock £5.40
Nice
I'll be over to get one. Many thanks
Posted: Fri Jun 05, 2015 10:11 pm
Author: phil1r
pertonpc wrote:Hi Phil,
Take a look on these pics. You can see the inner and outer seal and the part number you need.
Think it is picture 16 as you scroll down
From Mark
http://www.zedrider.co.uk/z1-b.html
This should be the same for a Z1R I would think
Posted: Fri Jun 05, 2015 10:14 pm
Author: z1bman
you need to inspect the tacho gear shaft & make sure it is not worn where the seal grips the shaft. also fit a z650 fibre washer between the cable & the threaded part of the tacho drive