Thought I remembered seeing those two bearings somewhere?
Drive shaft bearing and Sprocket Bearing (cluster/ Layshaft).
Couldn't find them at ZPower or Z1Ent?
RegardZ.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Where do Yu Getem ~ Gearbox bearings
Moderators: paul doran, Taffus, KeithZ1R, chrisu
Where do Yu Getem ~ Gearbox bearings
Garn (Sydney) Z1, Z1A, Z1B and Z900-A4
Thanks Guys,
Managed to pick up the bearing I was really after. It was the thinner ball bearing on the output shaft. Original Read NSK BL305N.
Replacement was NACHI 6305-2NSE9NR. [Aust $28]
I had to remove the fibre dust covers To allow oil to penetrate, also it came with a full circle retainer ring.
RegardZ
Managed to pick up the bearing I was really after. It was the thinner ball bearing on the output shaft. Original Read NSK BL305N.
Replacement was NACHI 6305-2NSE9NR. [Aust $28]
I had to remove the fibre dust covers To allow oil to penetrate, also it came with a full circle retainer ring.
RegardZ
Garn (Sydney) Z1, Z1A, Z1B and Z900-A4