Z1OwnersClub GB

Gents

I'm looking to get one of these PMC replica looms. They do one for a Z1000R but not a J.. Does anyone know off the top of their heads if there is much difference? Or I could use the R loom with some minor mods?

Cheers
Lee

Lee.
There should be no difference apart from the clocks.
The R uses the same type as the J3 but I assume you are changing your clocks anyway?

When I built mine I used a unitrak loom on basically a J frame but with ZR7 clocks





Helpfully Kawasaki still use the same colours for their wiring they always have. This was one of the easier jobs of the build.

All the connectors except for the indicators (tiny bullets-unless someone knows differently) are available. Tackled methodically anything is possible.

Chris

Perfect, just what I was hoping to hear. Yes I am changing the clocks so no stress there. Ok will get them ordered up. Cheers for that!

Lee

LeeJackson wrote:Chris

Perfect, just what I was hoping to hear. Yes I am changing the clocks so no stress there. Ok will get them ordered up. Cheers for that!

Lee

How did you get on with the PMC loom Lee ? I know it's a little while ago now ...

Simonic wrote:

LeeJackson wrote:Chris

Perfect, just what I was hoping to hear. Yes I am changing the clocks so no stress there. Ok will get them ordered up. Cheers for that!

Lee

How did you get on with the PMC loom Lee ? I know it's a little while ago now ...

Hi sorry not been on in ages and missed this. It was a while ago! It went fine, few minor tweaks but worked and is still working just fine! Sorry for late feedback!

LeeJackson wrote:

Simonic wrote:

LeeJackson wrote:Chris

Perfect, just what I was hoping to hear. Yes I am changing the clocks so no stress there. Ok will get them ordered up. Cheers for that!

Lee

How did you get on with the PMC loom Lee ? I know it's a little while ago now ...

Hi sorry not been on in ages and missed this. It was a while ago! It went fine, few minor tweaks but worked and is still working just fine! Sorry for late feedback!

Thanks Lee. I bought a J3 a little while ago which was described to me as 'almost pristine' The loom looks like it been attacked by a rabid dog and hardly anything works