Hello,
Currently trying to reinstate my rear helmet lock bracket.
Can someone with a standard one give me the inner dimensions of the square hole on the bracket above where the lock sits.
I currently have width 50mm and height 43mm but I can still adjust the height.
Don't want it too short on the height or it will foul the bodywork.
Thanks for looking.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
ZRX Helmet Lock Frame Dimension Check Please
Moderators: paul doran, Taffus, KeithZ1R, chrisu
ZRX Helmet Lock Frame Dimension Check Please
Z1-R D1, Z650 B2, Z1-B & ZRX 1200 A1P Catch 'em if you can at www.Zedrider.co.uk
- Rhencullen
- 100Club
- Posts: 243
- Joined: 26th Jun 2011
- Location: Lincolnshire
Thanks for looking anyway.
I will report back if I get the size from anywhere else.
Looking at your assembled one there is only a gnat's whisker of clearance so the pics are useful anyhow.
Mark
I will report back if I get the size from anywhere else.
Looking at your assembled one there is only a gnat's whisker of clearance so the pics are useful anyhow.
Mark
Z1-R D1, Z650 B2, Z1-B & ZRX 1200 A1P Catch 'em if you can at www.Zedrider.co.uk
I have the info now thanks.
Gonna try and set the hole dimensions at 50mm width and 45mm height for starters and see how that goes.
Have more measurements if anyone needs em.
Cheers
Gonna try and set the hole dimensions at 50mm width and 45mm height for starters and see how that goes.
Have more measurements if anyone needs em.
Cheers
Z1-R D1, Z650 B2, Z1-B & ZRX 1200 A1P Catch 'em if you can at www.Zedrider.co.uk
Who is online
Users browsing this forum: No registered users and 152 guests