Page 1 of 1
New HT Leads
Posted: Mon Mar 20, 2017 10:21 pm
Author: AlanB
I want to replace my current HT Leads/Plug caps etc on my 79 Z1000 A2 as they are old and mixed colours - Any suggestions on good quality ones to use ? Also do they come ready to plug straight in or is there other work required to fit ? Thanks all.
Re: New HT Leads
Posted: Mon Mar 20, 2017 10:58 pm
Author: Kev1R
Unless you have a quality crimping tool I would recommend buying leads with the coil connection (to the lead) ready done.
I was able to do this with mine which simply screw into my existing old style spark plug caps.
Since the coils gave up the ghost on my A2 about 3 years ago I did leads and coils in one hit
You can of course buy them ready made up and complete
Taylor leads seem to be widely used
Re: New HT Leads
Posted: Tue Mar 21, 2017 8:10 am
Author: zed1015
I use Dyna leads..
Half the price of Taylor's and perform just the same.
http://www.ebay.co.uk/itm/Kawasaki-Z900 ... Swd0BV3Lvk
Re: New HT Leads
Posted: Tue Mar 21, 2017 4:10 pm
Author: Julian_Boolean
You have to put the connectors that go into the coils onto the Dyna leads yourself, not difficult, I did a set on Sunday with a pair of pliers and a firm push.
Re: New HT Leads
Posted: Tue Mar 21, 2017 9:53 pm
Author: swampy
My preference is Taylor leads as I prefer thier ht cap, and they come in a variety of colour choice. Hs has been said a pair or pliers and job done.