Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Thread pitch
Moderators: paul doran, Taffus, KeithZ1R, chrisu
Thread pitch
Can someone confirm the thread pitch on the top and bottom of the engine studs, they seem to differ, ta
CB125 GT380 CB750F1 Z1R GPZ 750 Turbo Z1R
Re: Thread pitch
From memory.
M10 x 1.5 (standard or course) into the cases.
M10 x 1.25 (metric fine) for the nut.
Paul
M10 x 1.5 (standard or course) into the cases.
M10 x 1.25 (metric fine) for the nut.
Paul
A2 1979-80. A1 1980-now
Re: Thread pitch
Cheers Pops, you confirmed what I was told this afternoon.
CB125 GT380 CB750F1 Z1R GPZ 750 Turbo Z1R