any guys got a spare valve shimming tool they want to sell cant find mine looked everywhere for it and z power want ?35 for a new one
wanted to get the bike shimmed up ready for the weekend but now it will have to wait......
cheers Bob
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
valve tool
Moderators: chrisu, paul doran, Taffus, KeithZ1R
valve tool
Z1100R /,,,,,,,SOLD IT /// Z1B REP ZEPHYR SOLD THAT NOW TOO /////////
AND A Z1000H IN TINY PEICES ALL OVER MY WORKSHOP NOW
AND A Z1000H IN TINY PEICES ALL OVER MY WORKSHOP NOW
-
- Hardcore
- Posts: 1630
- Joined: 28th Mar 2003
- Location: Warwickshire
Re: valve tool
ninjabob wrote:any guys got a spare valve shimming tool they want to sell cant find mine looked everywhere for it and z power want ?35 for a new one
wanted to get the bike shimmed up ready for the weekend but now it will have to wait......
cheers Bob
Hi Bob I have one you can borrow,
let me know
cheers
pj
sorry forgot to say I am out and about during tomorrow, kingswinfor and oldbury - you any where near?
WHO NEEDS DRUG'S
- RALPHARAMA
- Area Rep.
- Posts: 2752
- Joined: 19th May 2007
- Location: Pensford, Somerset
- Contact:
Bob, M&P do one for about ?10.
Wish I'd known that ... just bought mine from Zed Power!!!
You're welcome to use mine Bob
Ralph Ferrand
Z1000A1 (1977), Godier Genoud Z1300A5 (1983), Z900A4 Stock (1976), Z900A4 Special (project), GPZ1100 Unitrak (1983), ZRX1200R (2004) DT175MX (1981).
http://www.bikerstoolbox.co.uk
Don't be caught out http://www.dhlparcels.info/
Z1000A1 (1977), Godier Genoud Z1300A5 (1983), Z900A4 Stock (1976), Z900A4 Special (project), GPZ1100 Unitrak (1983), ZRX1200R (2004) DT175MX (1981).
http://www.bikerstoolbox.co.uk
Don't be caught out http://www.dhlparcels.info/
Re: valve tool
ninjabob wrote:any guys got a spare valve shimming tool they want to sell cant find mine looked everywhere for it and z power want ?35 for a new one
wanted to get the bike shimmed up ready for the weekend but now it will have to wait......
cheers Bob
Hi Bob how did you get on with the valves?
cheers
pj
WHO NEEDS DRUG'S
Valves
ninjabob wrote:hi paul doing ok got them all sized up just waiting now for jerry to send me them and then i will get your valve tool back to you asap
thanks again for the loan of it
No Probs bob, just wondered how you were doing, don't need it myself for about two weeks,
Cheers
PJ
WHO NEEDS DRUG'S
Fax copy
I borrowed an original Kawasaki tool from my local specialist (sadly now moved away( A&H Performance ) I verniered the little beggar and after six hours of drawing, hacking , filing, sanding drilling, tapping, counterboring and sawing produced a perfect copy of the original. At six pounds per hour it makes the Z Power one look cheap. However i did get ?35 worth of satisfaction out of making it. Not recommended in hind sight cos of the many hundreds of pounds of damage a poorly made item might do!!!!!!!
Anyone need the drawings?
AL
Anyone need the drawings?
AL
1981 J1
Who is online
Users browsing this forum: No registered users and 65 guests