Has anyone done a single side swingarm conversion on a z1000j
If so which swing arm did they use and did it turn out a good or bad conversion.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Single side swingarm conversion
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Re: Single side swingarm conversion
Had this project for a number of years now, didn't do the conversion myself, but it sits well...thinking about selling it
- IMG_0244.JPG (140.55 KiB) Viewed 2607 times
- IMG_0246.JPG (152.47 KiB) Viewed 2607 times
- IMG_0243.JPG (142.3 KiB) Viewed 2607 times
- IMG_0245.JPG (178.05 KiB) Viewed 2607 times
- IMG_0249.JPG (160.84 KiB) Viewed 2607 times
- IMG_0251.JPG (172.63 KiB) Viewed 2607 times
paid up member
Re: Single side swingarm conversion
Nice looking zed Rob 
John !, Chrisu has a z1r he converted to a single sided swingarm ,it may be worth pm him
John !, Chrisu has a z1r he converted to a single sided swingarm ,it may be worth pm him
zedsrus:"i don't know man ,i just got here myself !!"
Re: Single side swingarm conversion
mine was a one-off swingarm/hub/wheel from FCW in Germany so not a really good example.
I've see VFR Hodnas, Ducati and Triumph ones fitted though.
Trick is to get the chain in line !
I've see VFR Hodnas, Ducati and Triumph ones fitted though.
Trick is to get the chain in line !