Z1OwnersClub GB

Posted: **Tue Aug 08, 2017 8:44 pm**

Has anyone done a single side swingarm conversion on a z1000j
If so which swing arm did they use and did it turn out a good or bad conversion.

Posted: **Tue Aug 15, 2017 7:15 am**

Had this project for a number of years now, didn't do the conversion myself, but it sits well...thinking about selling it

: IMG_0244.JPG (140.55 KiB) Viewed 3181 times

: IMG_0246.JPG (152.47 KiB) Viewed 3181 times

: IMG_0243.JPG (142.3 KiB) Viewed 3181 times

: IMG_0245.JPG (178.05 KiB) Viewed 3181 times

: IMG_0249.JPG (160.84 KiB) Viewed 3181 times

: IMG_0251.JPG (172.63 KiB) Viewed 3181 times

Posted: **Tue Aug 15, 2017 5:07 pm**

Nice looking zed Rob :wink:

John !, Chrisu has a z1r he converted to a single sided swingarm ,it may be worth pm him

Posted: **Tue Aug 15, 2017 7:21 pm**

mine was a one-off swingarm/hub/wheel from FCW in Germany so not a really good example.

I've see VFR Hodnas, Ducati and Triumph ones fitted though.

Trick is to get the chain in line !

Posted: **Tue Aug 15, 2017 7:22 pm**

see attached

Posted: **Tue Aug 15, 2017 7:24 pm**

the other side. Bit of an old photo as you can see.

Z1OwnersClub GB

Single side swingarm conversion

Single side swingarm conversion

Re: Single side swingarm conversion

Re: Single side swingarm conversion

Re: Single side swingarm conversion

Re: Single side swingarm conversion

Re: Single side swingarm conversion