Just going over my bike cleanIng up and checking wiring. All pretty good apart from one earth wire that has lost an inch or so of its coating. The wire itself is good and shows no sign of damage. It is the earth that goes into a 6 pin connector running into the regulator. Dare I hope that the damage is just age related and re wrap the wire or should I worry more? Bike runs perfectly.
Thanks,
Ian.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
earth wire outer.
Moderators: paul doran, Taffus, KeithZ1R, chrisu
Re: earth wire outer.
if it "runs perfectly", don't worry, just redo that bit of insulation & check connection for corrosion & security.... sorted.
And on the 7th day... Zeds were created!
Re: earth wire outer.
Thanks.
Ian.
Ian.
Re: earth wire outer.
wot Piggy sed and if your carefull you can tease the connector out of the socket and get some heat shrink sleeve on it maybe
Keith
You can never have too many tools in your life, except the two legged variety
I'm never wrong, once I thought I was but I was
mistaken.
Phil Churchett winner 2013
You can never have too many tools in your life, except the two legged variety
I'm never wrong, once I thought I was but I was
mistaken.
Phil Churchett winner 2013
Who is online
Users browsing this forum: No registered users and 204 guests