Anyone know of a good contact?
I need some caliper mounting brackets made (I want to fit larger front discs as the current ones overheat on the track).
I've sent drawings to a couple of people and had no response.
Thanks
Brian
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Contact for machined parts
Moderators: paul doran, Taffus, KeithZ1R, chrisu
- brian 1100
- 100Club
- Posts: 120
- Joined: 19th Sep 2008
- Location: Hampshire
-
- ZedHead
- Posts: 1180
- Joined: 25th Feb 2008
Re: Contact for machined parts
best thing is to buy a machine and make em yourself .
Re: Contact for machined parts
I have a set, they are for six pot's to standard Z forks (I think) will dig them out if you think they may help and send you some photos and dims.
- Ginger Bear
- Hardcore
- Posts: 5512
- Joined: 16th Dec 2008
- Location: In the Dark.
- Contact:
Re: Contact for machined parts
Try Mike at Full Metal Ornament.
I've used him a few times and have been very happy with the service/products.
http://www.fullmetalornament.com/
I've used him a few times and have been very happy with the service/products.
http://www.fullmetalornament.com/
Re: Contact for machined parts
I might know a man that can help.
What form are the drawings in?
What form are the drawings in?
- brian 1100
- 100Club
- Posts: 120
- Joined: 19th Sep 2008
- Location: Hampshire
Re: Contact for machined parts
Gingerbear thanks for the contact.
Zedhead, I have drawings in Autocad format if you have another contact.
I have a Dymag front wheel and specially made discs to fit the wheel with standard calipers and 280mm discs.
They overheated so I had brackets made to fit Tokico two pot calipers for which I can could buy race pads. I did this and they still overheat.
I now want to upgrade to 310mm discs -these calipers are used on various bikes with discs up to this size.
Alan at Kipkawa made the last set of brackets but has now retired.
Brian
Zedhead, I have drawings in Autocad format if you have another contact.
I have a Dymag front wheel and specially made discs to fit the wheel with standard calipers and 280mm discs.
They overheated so I had brackets made to fit Tokico two pot calipers for which I can could buy race pads. I did this and they still overheat.
I now want to upgrade to 310mm discs -these calipers are used on various bikes with discs up to this size.
Alan at Kipkawa made the last set of brackets but has now retired.
Brian
Re: Contact for machined parts
PM sent
Re: Contact for machined parts
If there are sources for this type of work, can we share them round in public please ? Lots of us have projects on the boil
FMO looks very interesting.
FMO looks very interesting.
Why do I persist in debating with idiots ? I really should know better
Who is online
Users browsing this forum: Bing [Bot] and 200 guests