Starting the rebuild of my z1000A1 engine and am replacing the camchain as they're not expensive. Checking things as i go, my camchain only measures 149mm over 20 links. Other posts going back years have quoted a length of 155-156mm and my genuine kz1000 workshop manual says Standard is 160mm with a service limit of 162.4mm.
Have i lost the ability to use a rule or has anyone else found themselves in this confusing place?
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
camchain service limit
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Re: camchain service limit
157.8 in my genuine manual
Re: camchain service limit
Thanks Z1Bman, never could figure out posting photos on here but i have a KZ1000 service manual, part no. 99931-540-01
page 141. this has the above figures in it. Go figure!
page 141. this has the above figures in it. Go figure!
Re: camchain service limit
it states in my manual standard should be 155.48 - 155.71
Re: camchain service limit
Hi Chris
as soon as you rebuild an engine, don't bother about the lenght of the camchain, replace it! And replace all the other camchain parts too! When you replace them and you start your engine you can be sure it will run for thousands of miles without any worries.
GrtZ
Philippe
as soon as you rebuild an engine, don't bother about the lenght of the camchain, replace it! And replace all the other camchain parts too! When you replace them and you start your engine you can be sure it will run for thousands of miles without any worries.
GrtZ
Philippe
the differences between a little boy and an adult man is the price and size of their toys!
Re: camchain service limit
Phil He is replacing the chain,the question is that the one he has been supplied with is 6mm shorter...I think?or is it the one coming out?
PAULJAC47,,,,,"She may not look like much, but she's got it where it counts, kid."
-Han Solo
You can't polish a turd, but you can roll it in glitter
Salad is what real food eats.
Anon
PUM 673
-Han Solo
You can't polish a turd, but you can roll it in glitter
Salad is what real food eats.
Anon
PUM 673
Re: camchain service limit
Hi Paul
oh I didn't understand it that way. I thought he was talking about his old camchain...as far as the dimensions of the new one are concerned I have to be honest, I never measured a camchain, old or new. As long as you have ordered the right one with the correct number, you don't have to worry about the lenght. For a Z1000A1 or A2 it should have 122 links, for an A3 or an ST it should have 124 links. I hope Chris has the correct one.
Greetings
Philippe
oh I didn't understand it that way. I thought he was talking about his old camchain...as far as the dimensions of the new one are concerned I have to be honest, I never measured a camchain, old or new. As long as you have ordered the right one with the correct number, you don't have to worry about the lenght. For a Z1000A1 or A2 it should have 122 links, for an A3 or an ST it should have 124 links. I hope Chris has the correct one.
Greetings
Philippe
the differences between a little boy and an adult man is the price and size of their toys!
Re: camchain service limit
Hi guys
checked some things about the camchain:
type: DID 219 T 122 links
lenght of 20 links:155.48 mm ( standard) 157.80 mm ( worn)
DON'T FORGET: the lenght of 20 links count 21 pins: you have to start measuring from the centre of the first pin to the centre of the 21 st pin! If you don't do it that way you don't get the correct lenght.
Hope to have helped you
Greetings
Philippe
checked some things about the camchain:
type: DID 219 T 122 links
lenght of 20 links:155.48 mm ( standard) 157.80 mm ( worn)
DON'T FORGET: the lenght of 20 links count 21 pins: you have to start measuring from the centre of the first pin to the centre of the 21 st pin! If you don't do it that way you don't get the correct lenght.
Hope to have helped you
Greetings
Philippe
the differences between a little boy and an adult man is the price and size of their toys!
Re: camchain service limit
Yeah, i'm replacing it anyway (like always). My concern now is that my genuine manual seems to be different to Z1Bman's.
New one hasn't arrived yet but i changed one in my other Z a few months back and had the same measuring difficulties. Engine runs fine though!
New one hasn't arrived yet but i changed one in my other Z a few months back and had the same measuring difficulties. Engine runs fine though!
Who is online
Users browsing this forum: gray and 162 guests