Ref: Z1a
Please could anyone advise what size the Hex Head should be across flats for the 8mm bolts that go through the engine brackets into the frame and the 2 longer 8mm bolts that go through the front bracket. 12mm or 13mm ?
The original ones on my Z1000 are 13mm A/F but the ones I ordered for the Z1 came at 12mm A/F
Thanks
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Engine Brackets
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Engine Brackets
Past 5 Years
1974 UK Z1a, Candy Tone Brown/Orange
1976 KZ900a4, Diamond Dark Green
1978 KZ1000a2, Luminous Green
1976 KZ1000a1, Red
1972 GT750J, Candy Lavender
1974 UK Z1a, Candy Tone Brown/Orange
1976 KZ900a4, Diamond Dark Green
1978 KZ1000a2, Luminous Green
1976 KZ1000a1, Red
1972 GT750J, Candy Lavender
Re: Engine Brackets
13mm is correct
Who is online
Users browsing this forum: BAFF1960, sockpuppet and 107 guests