Hello Guest User,

Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.

To access these 'Registered Users Only' areas simply register and login.

Coil question.

Need help restoring, building, or finding then try here.

Moderators: chrisu, paul doran, Taffus, KeithZ1R

Message
Author
DavidZ1R
Hardcore
Hardcore
Posts: 1478
Joined: 12th Jun 2011
Location: Bolton Lancs

Coil question.

#1 PostAuthor: DavidZ1R » Sat Feb 24, 2018 4:00 pm

Is it possible that one side of a double lead coil can breakdown, the coils on my bike are the originals, but no.2 pot keeps miss firering it pops back into the air box and sometimes the plug sparks from side to point not from tip to bend. Or could it be a pilot jet fault, have had the head off for oil leak, shim gaps all set to .15 carbs been cleaned and flushed through, it just won't tick over right and pops? Baffled.
CB125 GT380 CB750F1 Z1R GPZ 750 Turbo Z1R

User avatar
warren3200gt
Hardcore
Hardcore
Posts: 2722
Joined: 13th Jun 2014
Location: Dartford Kent

Re: Coil question.

#2 PostAuthor: warren3200gt » Sat Feb 24, 2018 4:11 pm

Think lean mixture at tickover on no 2 would do that David. Have you colour tuned them? Wouldnt cause the plug issue though.
PUM 488 June 2023
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.

User avatar
z1bman
Hardcore
Hardcore
Posts: 4671
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

Re: Coil question.

#3 PostAuthor: z1bman » Sat Feb 24, 2018 4:31 pm

i presume you have swapped the plug?

DavidZ1R
Hardcore
Hardcore
Posts: 1478
Joined: 12th Jun 2011
Location: Bolton Lancs

Re: Coil question.

#4 PostAuthor: DavidZ1R » Sat Feb 24, 2018 5:11 pm

Yes I did colour tune them last week, all worked fine then, went to start it today, run fine on three but no 2 cylinder not getting as hot as the others , have swapped the plugs about, found one duff plug, changed but still erratic, might put new plugs in and try again, if I can get it going on four will double check the colour tune. Plug does get sort of wet, not sure if it's oily residue had new valve stem seals, valve done and new gaskets all rou do, head done by professional garage.
CB125 GT380 CB750F1 Z1R GPZ 750 Turbo Z1R

User avatar
warren3200gt
Hardcore
Hardcore
Posts: 2722
Joined: 13th Jun 2014
Location: Dartford Kent

Re: Coil question.

#5 PostAuthor: warren3200gt » Sat Feb 24, 2018 5:14 pm

Probably that dodgy foriegn exhaust thats doing it. Probably best you put a 4 into 1 on it :D
PUM 488 June 2023
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.

DavidZ1R
Hardcore
Hardcore
Posts: 1478
Joined: 12th Jun 2011
Location: Bolton Lancs

Re: Coil question.

#6 PostAuthor: DavidZ1R » Sat Feb 24, 2018 5:16 pm

Lol Warren, it's got a 4 into 1 on, it's my Z1R. The Z1000a1 fired up fine, apart from 1 plug, but then it is a 40 year old one, treating that to new plugs before mot
Attachments
20180224_140857.jpg
20180224_140857.jpg (165.82 KiB) Viewed 4314 times
CB125 GT380 CB750F1 Z1R GPZ 750 Turbo Z1R

User avatar
warren3200gt
Hardcore
Hardcore
Posts: 2722
Joined: 13th Jun 2014
Location: Dartford Kent

Re: Coil question.

#7 PostAuthor: warren3200gt » Sat Feb 24, 2018 5:22 pm

Snap.
s-l1600 (2).jpg
PUM 488 June 2023
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.

DavidZ1R
Hardcore
Hardcore
Posts: 1478
Joined: 12th Jun 2011
Location: Bolton Lancs

Re: Coil question.

#8 PostAuthor: DavidZ1R » Sat Feb 24, 2018 5:31 pm

Very nice too Warren, proper colour too, mine is a different blue, super candy, on
instructions from she who must be obeyed , bet your pipes where a bit more local.lol
CB125 GT380 CB750F1 Z1R GPZ 750 Turbo Z1R

User avatar
warren3200gt
Hardcore
Hardcore
Posts: 2722
Joined: 13th Jun 2014
Location: Dartford Kent

Re: Coil question.

#9 PostAuthor: warren3200gt » Sat Feb 24, 2018 5:38 pm

Still on it when I got it. One of the main reasons I went for that one. Swopped the seat cover, need to add a strap and 2nd front disc then I'll be happy.
PUM 488 June 2023
76 Z900A4, 77 Z650B1, 77 KZ650B1, 77 Z1000A1, 82 Z1000J2, ZRX1100R.

User avatar
z1bman
Hardcore
Hardcore
Posts: 4671
Joined: 3rd Mar 2010
Location: WORDSLEY WEST MIDLANDS

Re: Coil question.

#10 PostAuthor: z1bman » Sat Feb 24, 2018 5:39 pm

what plug caps are you using ?

DavidZ1R
Hardcore
Hardcore
Posts: 1478
Joined: 12th Jun 2011
Location: Bolton Lancs

Re: Coil question.

#11 PostAuthor: DavidZ1R » Sat Feb 24, 2018 5:47 pm

They are the original American plastic ones, got metal ones on my z1000, won't use that in the wet though, it will be like the old days, sparking and cracking all over, must admit never thought about the cap, will try swapping it over see if that makes any difference, cheers Paul.
CB125 GT380 CB750F1 Z1R GPZ 750 Turbo Z1R

User avatar
Garry.L
Hardcore
Hardcore
Posts: 3083
Joined: 11th Jun 2011
Location: Cheapest Cheshire

Re: Coil question.

#12 PostAuthor: Garry.L » Sat Feb 24, 2018 7:14 pm

DavidZ1R wrote:Lol Warren, it's got a 4 into 1 on, it's my Z1R.


Time to get shut of the old Nail David....

My original offer was £1500, but given it now needs a total engine rebuild I'll go £500 .... if you deliver of course.
ʎɐqǝ uo pɹɐoqʎǝʞ ɐ ʎnq ı ǝɯıʇ ʇsɐן ǝɥʇ sı sıɥʇ

DavidZ1R
Hardcore
Hardcore
Posts: 1478
Joined: 12th Jun 2011
Location: Bolton Lancs

Re: Coil question.

#13 PostAuthor: DavidZ1R » Sat Feb 24, 2018 7:28 pm

Thought it over Garry, , but as I have just spent £250 on the head work, I will hang on for a bit, good offer tho :lol:
CB125 GT380 CB750F1 Z1R GPZ 750 Turbo Z1R

DavidZ1R
Hardcore
Hardcore
Posts: 1478
Joined: 12th Jun 2011
Location: Bolton Lancs

Re: Coil question.

#14 PostAuthor: DavidZ1R » Sat Feb 24, 2018 7:29 pm

DavidZ1R wrote:Thought it over Garry, , but as I have just spent £250 on the head work, I will hang on for a bit, good offer tho :lol:

And I feckin hate liver
CB125 GT380 CB750F1 Z1R GPZ 750 Turbo Z1R

User avatar
walshyco
100Club
100Club
Posts: 387
Joined: 4th Oct 2009
Location: Exmouth

Re: Coil question.

#15 PostAuthor: walshyco » Sun Feb 25, 2018 8:56 am

You could swap the coils over and see if the misfire move, that would eliminate the coil.


Return to “Bike Help”

Who is online

Users browsing this forum: No registered users and 99 guests