Does anyone have a GPZ1100A Unitrack splined clutch centre sleeve they can measure for me.
I need the overall length, the length of the reduced outer portion and the max outer diameter of the reduced portion.
Thanks.
Hello Guest User,
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
Please feel free to have a look around the forum but be aware that as an unregistered guest you can't see all of it and you can't post.
To access these 'Registered Users Only' areas simply register and login.
1100 Unitrack clutch center spline measurements needed.
Moderators: chrisu, paul doran, Taffus, KeithZ1R
Re: 1100 Unitrack clutch center spline measurements needed.
Length is 50mm, 21.93mm length of reduced portion (end of large spline to machined end of sleeve) and 31.95mm max outer portion across two splines.
AL
AL
1981 J1
- z1000puddin
- Custard Cream
- Posts: 891
- Joined: 23rd Jul 2011
- Location: Aberdeen,Dyce
Re: 1100 Unitrack clutch center spline measurements needed.
O/A Length -49.5mm
Length of large dia. - 27mm
Length of reduced dia - 22.5mm
Dia. Of reduced end - 31mm
Length of large dia. - 27mm
Length of reduced dia - 22.5mm
Dia. Of reduced end - 31mm
Zed til Dead
Re: 1100 Unitrack clutch center spline measurements needed.
Thanks for that.
Slight variation in measurements though.
Anyone got one going spare ?
Cheers.
Slight variation in measurements though.
Anyone got one going spare ?
Cheers.
Re: 1100 Unitrack clutch center spline measurements needed.
cradley have it in stock
Who is online
Users browsing this forum: No registered users and 41 guests